Mobile power manufacturers remind consumers that when they first use mobile power, they must closely observe its charging status. To observe the blinking of the indicator light, pay attention to the maintenance and maintenance of the mobile power supply. At present, most of the mobile power supply has an external flashing light. If the flashing light is turned off, it can be determined that the mobile power supply is discharged. It can be used after recharging it. So what are the precautions when using mobile power?
Warm Tips for Mobile Power Manufacturers - Precautions and Taboos for Using Mobile Power
Do not continue to replenish after the first charge is completed
The professionally designed mobile power manufacturer Watson Technology reminds: When the mobile device has shown that the charging is completed, the USB connector needs to be removed in time, because the current mobile power supply is a smart mobile power supply, and the mobile device will not be recharged when it is fully charged. . If the mobile device continues to charge, it will only increase the self-consumption of the mobile power. So at this time it is still in a discharge state, which can affect its service life.
Do not plug in frequently during the second AC charging
After testing, mobile power manufacturers found that mobile power is indirect discharge, and it has no loss to itself. However, if AC power is used for frequent plugging and unplugging, it will affect its service life. Mobile power manufacturer reminds: At present, most mobile power supplies are made of batteries. When charging, it is best to wait until they are full before plugging in and using.
Third, do not charge in high temperature environment
Although the standard mobile power supplies produced by mobile power manufacturers are currently resistant to high temperatures, long-term charging in high temperature environments will shorten the service life. Therefore, when the mobile power source is charged, it is necessary to ensure the heat dissipation of the power supply. At the same time, do not place it in the sun to charge. The mobile power manufacturer Watson Technology once again reminds: This will not only reduce the power conversion rate, but also affect its service life.
Fourth, you need to charge regularly when you don’t use it for a long time
The quality-assured mobile power manufacturer reminds that even if it is not used for a long time, the mobile power supply will have a large loss. The long-term placement will make the mobile power supply self-discharge for a long time, and the battery will gradually go to sleep. If the battery is damaged if it is not used for a long time, the mobile power that is not used for a long time needs to be charged once every 2 to 4 months.
Mobile power manufacturer volpower finally reminds: you must follow the above precautions when using, to prevent danger when using. If the power supply is placed for a long time, the power display is inaccurate during charging, and it takes two to three times to charge before it gradually becomes normal. Do not panic or repair yourself at this time. The mobile power supply should not be stored in a humid environment, and should be kept away from liquids during charging.